Tuesday, October 2, 2007

Draining Water From Your Yard

Standing water in the yard is a very unattractive feature of a person’s property not only due to its aesthetically displeasing characteristic, but also because of the potential water damage that it can cause to the property if there is enough of it in the right area. The owner’s first instinct to fix this problem is to try and plant things in the area where the water tends to build up, but this will not typically work. Any plants that are put in an area that floods from time to time will drown and die. Getting rid of the standing water on your property is not too difficult most of the time, since the problem usually lies simply with the elevation of the part of the yard that is affected the most.

If it is a problem with the elevation of the flooded area, then all you really need to do is add soil to that area and make it level with the rest of your yard. This will keep the flooding at bay as long as the water builds up as a result of heavy rain. Plant some grass over it both to hide the soil and to keep it in place.

Installing a drainage system is also an option, but you need to contact your local building commission and be certain that you will be allowed to build a drainage system. Building permits can be tricky and you need to make sure that your building project is on the up and up before you start working on anything.

Digging a French drain is not very difficult to do. Dig a little ditch in your yard and lay a piece of PVC pipe down inside it. Cover it up with gravel and this will direct the water anywhere you want it to, like a city sewer or ditch. When you dig it, you need to be sure that the highest point of the pipe is in the area that you want to drain and that the lowest point is where you want the water to drain to. You need to make the pipe slant downhill 6 inches for every 100 feet. To keep soil from getting in the pipe, you should install a strainer over the end. A simple sink strainer capped over the end could work for this or a piece of wire mesh. A strainer at the lower end is not needed.

Jim Corkern is a writer and promoter of
Texas Water Damage Restoration and
Dallas Water Damage Restoration Which are Certified IICRC Water damage and mold remediation contractors.

Bathroom Humidity and Mold Problems

A relaxing bath or shower can be just what you need after a long day at work, but when you look up and around you and you see mold starting to grow on the walls, the relaxation usually gets ruined by the worry about that mold problem. It shows itself as a splotchy growth on the drywall and it usually moves slowly from one end of the room to the other. If left untreated, it will eventually cover the rest of your bathroom and then you really will not have much of a good time bathing.

Most of the time drywall that becomes contaminated needs to be taken out and thrown away, unless the growth is very new and superficial. If it is old growth and is found to be embedded into the wall, then the drywall cannot be cleaned, since it is such a porous surface. This is unfortunate, because tearing out drywall and replacing it can cost quite a bit, especially if you have to hire someone else to do it for you.

A lot of people seem to like installing carpet in their bathrooms, but what they may not realize is just what a very bad idea this is. Water and mold go hand in hand and once carpet gets wet and is allowed to stay that way on a continuing basis as it will be in a bathroom, it eventually begins to mold. When carpet gets moldy, the unfortunate fact about this, as with drywall, is that it usually has to be thrown out. Carpet can be cleaned, but the padding underneath it cannot and if mold continues to grow on the padding, any new carpet that you put over it will also be contaminated and so will the old carpet if you attempted to clean it.

Try to keep the humidity in the bathroom down by installing an exhaust vent to let steam and moisture out of the house. Also keep wet items of clothing and towels washed as often as possible and avoid letting them stay on the floor, especially a carpeted one.

Keep an eye on your toilet and make sure that it is flushing properly and that the members of your house are not putting too much toilet paper in it. Feminine napkins can sometimes be put into toilets, but this is usually only recommended for homes that are connected to city sewer systems. Homes with septic tanks tend to have a harder time with feminine napkins being put in the toilet and can stop up the whole system, particularly if the pipes are old and corroded.


Jim Corkern is a writer and promoter of
Texas Water Damage Restoration and
Houston Water Damage Restoration Which are Certified IICRC Water damage and mold remediation contractors.